Before you can use the system you must register the software. You should have received a registration code along with the details of where to get the installation routine, if you haven’t please contact your retailer.

When you access the page http://localhost/[VirtualDirectory] for the first time there will be a short delay while the software initialises the database for the first run, please wait until this is finished (it may take a number of minutes). Once it has finished you will be presented with the registration screen (Fig 1).

 

Fig 1

Fig 1

 

Enter your registration details in the relevant box (Fig 2).

 

Fig 2

Fig 2

 

Once you have entered these details click Get Key2. The software will check with the registration server to make sure your registration is valid. When a response is received, the second part of the registration key will be entered into the box marked Key2 and the button will change to Register (Fig 3). Click the Register button.

 

Fig 3

Fig 3

 

Once the registration is complete the Login page for InfoTime will load (Fig 4). You can then use the initial login details provided with your registration details to log into the software.

 

Fig 4

Fig 4